Translate

Tuesday, June 24, 2014

Maintain Workshop Safety 2




Venue: Institut Latihan Perindustrian (ILP) Jitra

Introduction

With the increase in vehicles on the road and the increasingly alarming rates of accident. Among the causes is damage to the vehicle and the system can’t function properly. Therefore, each vehicle chassis systems should be good maintained  and each user must understand the operating system, to ensure comfort and control of vehicle and environmental under control. To ensure that every vehicle that can work with the optimum and efficient and the damage can be avoided, it shall be maintained by user and according to manufacturer specifications. This course is offered to increase knowledge and skills specifically related to the system.


Target Group
This course is suitable for mechanics, fitter rates, technicians, workers with no skills and those who’s want to improve skills.


Prerequisites
This course is a level 2 of SKM certificate in a vehicle identification system; the participants should have an interest and basic knowledge of workshop safety systems

Objectives
Upon completion of the course, the participants should be able to:

a) Understand the workshop safety.
b) Carry out static vehicle inspection
c) Carry out chassis inspection
d) Carry out smoke test
e) Carry out brake test
f) Prepare vehicle authority inspection
g) Test workshop safety system.








Content

1.  Introduction of workshop safety
a)  Determine lay out of workshop
b)  Wear and function of PPE units.

2.  Perform vehicle inspection
a)    Static check.
b)    10 points.

3.  Perform chassis inspection
a)    Chassis
b)    Suspension. Steering
c)    Etc mechanism.

4.  Troubleshot smoke test
a)    Diesel tune DX.210
b)    Visual inspection.

5.  Troubleshoot and diagnose brake test performance.
a)    Static test
b)    Road test.

Training Method
Training will be delivered through a combination between theoretical talk, demonstration and practical lessons.

Schedule
Day 1
08.00 am         Registration
08.30 am         Operation and function of chassis, brake and exhaust.
10.30 am         Break
11.00 am         Identify chassis, brake and exhaust operation system.
01.00 pm         Lunch
02.00 pm         Perform workshop safety.
05.00 pm         End of day 1

Day 2
08.00 am         Prepare vehicle authority inspection.
10.30 am         Break
11.00 am         Static inspection, 10 points inspection
01.00 pm         Lunch
02.00 pm         Check and repair steering, suspension and chassis.
05.00 pm         End of day 2





Day 3
08.00 am         Troubleshoot steering, suspension, chassis inspection and etc..
10.30 am         Break
11.00 am         Check smoke
01.00 pm         Lunch
02.00 pm         Theory and practice test
05.00 pm         Closing ceremony


Course Instructor
The instructor for this course is:

1.    Mr. Nazarul Izmy bin Latip
DPV/DKM Automotive Technology, 4 years experience.

2.    Mr. Mohd Azdha bin Ibrahim
SKM 3 Hecom Technology,8 years experience.

3.    Mr. Idris bin Othman
SKM 3 Hecom Technology,4 years experience.


Contact Person
To obtain more information regarding this course, please contact Corporate and Lifelong Learning Section. (04- 9161926 ext 161 or 162). You can also send enquiries by email to bklh@ilpjitra.gov.my


Fees
Companies sending their employees to this course may apply for reimbursement from HRDF under the SBL scheme. 
Posted by at

1 comment:

  1. www.buymodapills.comSeptember 24, 2021 at 2:56 AM

    I'm so glad and enjoyed your BLOG, It is very informative on the subject or topic, and Thanks For Sharing this post. I have something to share here
    Get up To 30% Off buy modalert online

    Get up To 30% Off buy artvigil online
    Get up To 30% Off buy waklert online
    Get up To 30% Off buy vilafinil online

    ReplyDelete

Subscribe to: Post Comments (Atom)

ILP Jitra - Leader In Skills Excellence


i)Vision : To be a leading organization in the development of competitive workforce

ii)Mission: To produce competent workforce

iii)Objectives:
i-To aide in the direction of optimum utilization of Manpower through Industrial Training Programs.

ii-To improve the standard of skills among workers in the industrial sector.

iv)Core Values:

Access and Equity- Our services are available to everyone who needs them

Quality- A qualification from us should be acknowledged as a sign that the person has received quality training

Continuous improvement- We are always looking for ways to improve services to our clients

Respect for industry -We adapt our services to meet the needs of industry

Integrity -We are committed to the highest standards of ethical behavior

Community -We build partnerships with people and organizations who share our ideals so that together we can achieve more for our clients

Service- We exist to serve our country and industry

v)Corporate Strategy:

Our experienced course managers will serve as strategic partners in order to understand your specific business needs, challenges and requirements. Our consultative and collaborative approach allows our team to develop a sound strategy with clear objectives and outcomes. The insight we gain through our strategic approach will ensure your business receives competency-based, innovative and results-driven training, by the best trainers in the business.

vi)Quality Policy:

A qualification from us should be acknowledged as a sign that the person has received quality training

Please explain the method of formulating the corporate strategy

Experienced course managers will serve as strategic partners in order to understand your specific business needs, challenges and requirements .We will use CUDBASS techniques to find out the weakness and come out with the best solution to narrow down the gap among employees and help clients to boost their performance and profitability.


TRAINING PROGRAM DEVELOPMENT
All training programs including its curriculum structure developed follow National Occupational Skills Standards (NOSS). NOSS is a document that outlines the dexterity required of an employee working in Malaysia at a certain level of employment to achieve specific skills. This Standard was prepared by industry experts and skilled workers in related fields. Its help Skills Training Institute /Trainer/Instructor:
i. To develop an appropriate training curriculum which meets industry needs
ii. To design a full-time training program or customized program that meets industry needs
iii. To have a clearer understanding of the skills required by the industry
iv. Basic assessment of re- training needs of instructors/trainers to meet current industry needs
v. Proper career advice may be given effectively to trainees.

Describe the approaches implemented by your company in ensuring quality training programs.
i) Identification of training needs of employers/industries(Please attach any study, market intelligence or survey conducted).

All the training contents will be developed base on NOSS requirement to ensure the skill training programs meets the industry needs and eliminating miss match/gap between training provider and industry /employers needs. It’s also giving us a clear and systematic approach on how to provide skill training to help company and employee to enhance their career.


ii) Internal factors, including upgrading of trainers’ skills (Please provide evidence).

We train our Trainer/Instructor on related skills areas to improve their knowledge, skills and attitude to become the best trainer in skill training every year including sponsored their participation in Malaysia Skill Competition.


Briefly explain the effort put for continuous improvement of the training programs.

We are establishing Corporate and Lifelong Learning Division to lead on continuous improvement of the training programs and worked with the industry on how to produce competent workers.
CUDBASS method will help us to develop special and workable training programmes to benefit our clients.

Followers