Translate

Tuesday, June 24, 2014

VEHICLE ELECTRICAL SYSTEM REPAIR



Venue: Institut Latihan Perindustrian (ILP) Jitra


Introduction
Basic Electrical System, Power Window System, Central Locking System and Alarm System is a ten day course that give you a comprehensive training on your car and simulator. Participants will learn about basic electrical system, operation of power window system, central locking system and alarm system.


Target Group
This course is suitable for individuals who would like to learn more about automotive engine.


Prerequisites
There are no prerequisites for attending this course.


Objectives
After completing this course, the participants should be able to:
1.    Check battery condition
2.    Check starting system
3.    Check ignition system
4.    Check lighting system
5.    Check wiper system
6.    Check power window system
7.    Check central locking system
8.    Check alarm system

Content
1.    Examine condition of battery
2.    Examine condition of starting system
3.    Examine condition of ignition system
4.    Examine condition of lighting system
5.    Examine condition of wiper system
6.    Examine condition of power window system
7.    Examine condition of central locking system
8.    Examine condition of alarm system




Training Method
Training will be delivered through between theoretical talk, demonstration and practical lessons.


Schedule
Day 1
08:00 a.m.       Registration and briefing
08.30 am         Introduction of Vehicle Electrical System
10:00 a.m.       Break
10:30 a.m.       Basic Electricity (theory)
Purpose of charging and starting system       
01:00 p.m.       Break
02:30 p.m.       Check Battery (demonstration and practice)
Charging vehicle battery
Check charging circuit
Check and test starter motor
Check relay
05:30 p.m.       End of day 1

Day 2
08:00 a.m.       Ignition system (theory)
10:00 a.m.       Break
10:30 a.m.       Check Ignition system component (demonstration and practice)
Adjust contact breaker point clearance
Remove and install distributor
01:00 p.m.       Break
02.00 p.m.       Practical exercises
05.00 p.m.       End of day 2

Day 3
08:00 a.m.       Lighting system (theory)
10:00 a.m.       Break
10:30 a.m.       Check continuity of the bulb and fuse
(demonstration and practice)
Adjust alignment of head lamp
Identify location of wiper motor and wind screen washer motor.
Remove wiper motor from vehicle.
01:00 p.m.       Break
02.30 p.m.       Practical exercises
05.30 p.m.       End of day 3


Day 4
08:00 a.m.       Central locking and Alarm system (theory)
10:00 a.m.       Break
10:30 a.m.       Check central locking and alarm system component
(demonstration and practice)
                        Check actuator
Remove and install actuator
01:00 p.m.       Break
02.00 p.m.       Practical exercises
05.00 p.m.       End of day 4

Day 5
08:00 a.m.       Central Locking system layout (theory)
10:00 a.m.       Break
10:30 a.m.       Install central locking system according to wiring diagram
(demonstration and practice)
                        Check the functional of central locking system
01:00 p.m.       Break
02.30 p.m.       Practical exercises
05.30 p.m.       End of day 5

Day 6
08:00 a.m.       Alarm system  layout (theory)
10:00 a.m.       Break
10:30 a.m.       Install alarm system according wiring diagram
(demonstration and practice)
                        Check the functional of alarm system
01:00 p.m.       Break
02.00 p.m.       Practical exercises
05.00 p.m.       End of day 6

Day 7
08:00 a.m.       Construction and function of Power Window system (theory)
10:00 a.m.       Break
10:30 a.m.       Install power window system according to wiring diagram
(demonstration and practice)
                        Check the functional of power window system
01:00 p.m.       Break
02.30 p.m.       Practical exercises
05.30 p.m.       End of day 7




Day 8
08:00 a.m.       Operation of power window system (theory)
10:00 a.m.       Break
10:30 a.m.       Install power window system according wiring diagram
(demonstration and practice)
                        Check the functional of alarm system
01:00 p.m.       Break
02.00 p.m.       Practical exercises
05.00 p.m.       End of day 8

Day 9
08:00 a.m.       Install power window system according to wiring diagram
(demonstration and practice)
10:00 a.m.       Break
10:30 a.m.       Install power window system according to wiring diagram
(demonstration and practice)
                        Check the functional of power window system
01:00 p.m.       Break
02.30 p.m.       Practical exercises
05.30 p.m.       End of day 9

Day 10
08:00 a.m.       Layout of power window system (theory)
10:00 a.m.       Break
10:30 a.m.       Troubleshooting power window system
Check voltage in wiring circuit
(demonstration and practice)
                        Check the functional of alarm system
01:00 p.m.       Break
02.00 p.m.       Practical exercises
05.00 p.m.       Closing ceremony











Course Instructor
This instructor for this course are Mr. Mohd Hafiz Bin Azam and Mr. Low Boon Poh  a senior instructor for Automotive Technology Program at ILP Jitra. They have more than 10 years of teaching experience in the field of automotive.


Contact Person
To obtain more information regarding this course, please contact Corporate and Lifelong Learning Section. (04- 9161926 ext 161 or 162). You can also send enquiries by email to bklh@ilpjitra.gov.my


Fees
The fee for this course is RM40,000.00 per package (15 participants + meals). Companies sending their employees to this course may apply for reimbursement from HRDF under the SBL scheme. 
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

ILP Jitra - Leader In Skills Excellence


i)Vision : To be a leading organization in the development of competitive workforce

ii)Mission: To produce competent workforce

iii)Objectives:
i-To aide in the direction of optimum utilization of Manpower through Industrial Training Programs.

ii-To improve the standard of skills among workers in the industrial sector.

iv)Core Values:

Access and Equity- Our services are available to everyone who needs them

Quality- A qualification from us should be acknowledged as a sign that the person has received quality training

Continuous improvement- We are always looking for ways to improve services to our clients

Respect for industry -We adapt our services to meet the needs of industry

Integrity -We are committed to the highest standards of ethical behavior

Community -We build partnerships with people and organizations who share our ideals so that together we can achieve more for our clients

Service- We exist to serve our country and industry

v)Corporate Strategy:

Our experienced course managers will serve as strategic partners in order to understand your specific business needs, challenges and requirements. Our consultative and collaborative approach allows our team to develop a sound strategy with clear objectives and outcomes. The insight we gain through our strategic approach will ensure your business receives competency-based, innovative and results-driven training, by the best trainers in the business.

vi)Quality Policy:

A qualification from us should be acknowledged as a sign that the person has received quality training

Please explain the method of formulating the corporate strategy

Experienced course managers will serve as strategic partners in order to understand your specific business needs, challenges and requirements .We will use CUDBASS techniques to find out the weakness and come out with the best solution to narrow down the gap among employees and help clients to boost their performance and profitability.


TRAINING PROGRAM DEVELOPMENT
All training programs including its curriculum structure developed follow National Occupational Skills Standards (NOSS). NOSS is a document that outlines the dexterity required of an employee working in Malaysia at a certain level of employment to achieve specific skills. This Standard was prepared by industry experts and skilled workers in related fields. Its help Skills Training Institute /Trainer/Instructor:
i. To develop an appropriate training curriculum which meets industry needs
ii. To design a full-time training program or customized program that meets industry needs
iii. To have a clearer understanding of the skills required by the industry
iv. Basic assessment of re- training needs of instructors/trainers to meet current industry needs
v. Proper career advice may be given effectively to trainees.

Describe the approaches implemented by your company in ensuring quality training programs.
i) Identification of training needs of employers/industries(Please attach any study, market intelligence or survey conducted).

All the training contents will be developed base on NOSS requirement to ensure the skill training programs meets the industry needs and eliminating miss match/gap between training provider and industry /employers needs. It’s also giving us a clear and systematic approach on how to provide skill training to help company and employee to enhance their career.


ii) Internal factors, including upgrading of trainers’ skills (Please provide evidence).

We train our Trainer/Instructor on related skills areas to improve their knowledge, skills and attitude to become the best trainer in skill training every year including sponsored their participation in Malaysia Skill Competition.


Briefly explain the effort put for continuous improvement of the training programs.

We are establishing Corporate and Lifelong Learning Division to lead on continuous improvement of the training programs and worked with the industry on how to produce competent workers.
CUDBASS method will help us to develop special and workable training programmes to benefit our clients.

Followers