Translate

Tuesday, June 24, 2014

COMMERCIAL REFRIGERATION INSTALLATION FOR BEGINNER





Venue: Institut Latihan Perindustrian (ILP) Jitra

Introduction

The heating, ventilating and air conditioning (HVAC) systems drive occupant comfort in buildings. HVAC systems control the air temperature, of course, but also to intake outside air, exhaust or filter contaminated air and efficiently use energy. Since HVAC systems are complicated, many Construction Supervisors don't bother to learn about them. That's a mistake. Most of the occupant complaints about the buildings we build involve HVAC systems, so we should all be paying more attention to how these systems get designed and installed.
If you take the time to understand the basics of HVAC systems, you'll discover valuable knowledge that you'll use on every project.

Target Group
This course is suitable for line leader and technician who want to learn the basic Commercial Refrigeration Installation.

Prerequisites
This course is an introductory course, therefore prior basic Commercial Refrigeration Installation not required to enrol in this course.

Objectives
Upon completion of the course, the participants should be able to:

a)    Locate and mount unit according to manual
b)    Connect refrigerant and water piping
c)    Wiring commercial refrigerator unit / cold room
d)    Vacuum and Charge the system
e)      Test and commissioning according to manufacturers specification

Content
Commercial refrigeration  installation for beginner

a)    Survey the suitable area                                                                                                                     Determine the power supply
b)    Prepare the material for the installation
c)    Locate and mount unit according to manual
d)    Connect refrigerant and water piping
e)    Vacuum and Charge the system
f)      Evaporator pressure regulator setting
g)    Adjust digital defrost controller
h)    Wiring commercial refrigerator unit / cold room
i)      Superheat setting
j)     Test run and conform their performance
k)    Pump down system / recovery refrigerant

Training Method
Training will be delivered through a combination between theoretical talk, demonstration and practical lessons.

Schedule
Day 1
8:00 a.m.         Registration & Briefing
8:30 a.m.         Introduction to commercial refrigeration  installation.
10:30 a.m.       Break
11:00 a.m.       Locate and mount unit according to manual
12:30 p.m.      Lunch
2:30 p.m.           Locate and mount unit according to manual
5:00 p.m.        End of day 1

Day 2
8:00 a.m.        Connect refrigerant and water piping
10:30 a.m.          Break
11:00 a.m.         Connect refrigerant and water piping
12:30 p.m.      Lunch
2:30 p.m.            Wiring commercial refrigerator unit / cold room
5:00 p.m.        End of day 2

Day 3
8:00 a.m.             Vacuum and Charge the system
10:30 a.m.       Break
11:00 a.m.      Test and commissioning according to manufacturers specification
12:30 p.m.      Lunch
2:30 p.m.            Cont.
5:00 p.m.        Closing ceremony

Course Instructor
The instructor for this course is Mr Sarizal Bin Ishak. He is currently teaches HVAC Technology program at ILP Jitra and have more than 15 years of experience in the field.

Contact Person
To obtain more information regarding this course, please contact Corporate and Lifelong Learning Section. (04- 9161926 ext 161 or 162). You can also send enquiries by email to bklh@ilpjitra.gov.my

Fees
Companies sending their employees to this course may apply for reimbursement from HRDF under the SBL scheme. 
Posted by at

1 comment:

  1. ankiApril 15, 2019 at 2:58 AM

    that was really a nice blog keep this work up thanks for sharing this types of blogs.

    led tv repairing course
    led tv repairing course
    led tv repairing course

    ABCMIT is known for your led tv repairing course and led tv repairing institute. it is also known as led lcd repairing institute or led lcd tv repair training.
    if you want to join led tv repairing course than abcmit gives you a discount on led tv repairing course. join son before the offer ends. to visit abmit for led tv repairing course
    call us on 9990879879

    ReplyDelete

Subscribe to: Post Comments (Atom)

ILP Jitra - Leader In Skills Excellence


i)Vision : To be a leading organization in the development of competitive workforce

ii)Mission: To produce competent workforce

iii)Objectives:
i-To aide in the direction of optimum utilization of Manpower through Industrial Training Programs.

ii-To improve the standard of skills among workers in the industrial sector.

iv)Core Values:

Access and Equity- Our services are available to everyone who needs them

Quality- A qualification from us should be acknowledged as a sign that the person has received quality training

Continuous improvement- We are always looking for ways to improve services to our clients

Respect for industry -We adapt our services to meet the needs of industry

Integrity -We are committed to the highest standards of ethical behavior

Community -We build partnerships with people and organizations who share our ideals so that together we can achieve more for our clients

Service- We exist to serve our country and industry

v)Corporate Strategy:

Our experienced course managers will serve as strategic partners in order to understand your specific business needs, challenges and requirements. Our consultative and collaborative approach allows our team to develop a sound strategy with clear objectives and outcomes. The insight we gain through our strategic approach will ensure your business receives competency-based, innovative and results-driven training, by the best trainers in the business.

vi)Quality Policy:

A qualification from us should be acknowledged as a sign that the person has received quality training

Please explain the method of formulating the corporate strategy

Experienced course managers will serve as strategic partners in order to understand your specific business needs, challenges and requirements .We will use CUDBASS techniques to find out the weakness and come out with the best solution to narrow down the gap among employees and help clients to boost their performance and profitability.


TRAINING PROGRAM DEVELOPMENT
All training programs including its curriculum structure developed follow National Occupational Skills Standards (NOSS). NOSS is a document that outlines the dexterity required of an employee working in Malaysia at a certain level of employment to achieve specific skills. This Standard was prepared by industry experts and skilled workers in related fields. Its help Skills Training Institute /Trainer/Instructor:
i. To develop an appropriate training curriculum which meets industry needs
ii. To design a full-time training program or customized program that meets industry needs
iii. To have a clearer understanding of the skills required by the industry
iv. Basic assessment of re- training needs of instructors/trainers to meet current industry needs
v. Proper career advice may be given effectively to trainees.

Describe the approaches implemented by your company in ensuring quality training programs.
i) Identification of training needs of employers/industries(Please attach any study, market intelligence or survey conducted).

All the training contents will be developed base on NOSS requirement to ensure the skill training programs meets the industry needs and eliminating miss match/gap between training provider and industry /employers needs. It’s also giving us a clear and systematic approach on how to provide skill training to help company and employee to enhance their career.


ii) Internal factors, including upgrading of trainers’ skills (Please provide evidence).

We train our Trainer/Instructor on related skills areas to improve their knowledge, skills and attitude to become the best trainer in skill training every year including sponsored their participation in Malaysia Skill Competition.


Briefly explain the effort put for continuous improvement of the training programs.

We are establishing Corporate and Lifelong Learning Division to lead on continuous improvement of the training programs and worked with the industry on how to produce competent workers.
CUDBASS method will help us to develop special and workable training programmes to benefit our clients.

Followers